Toothpaste marks, water spots, and fingerprints are just some of the obstacles to a spotless mirror. If you've ever attempted to clean office mirrors and end up with streaks, you know how difficult it is. The following are the procedures you should follow to always have a spotless mirror in your office.

What Do Professionals Use To Clean Commercial Mirrors in 2022?
Edomey Enterprises Ltd. - Jay Do
1. Spot Clean With Rubbing Alcohol & A Cotton Pad
Rubbing alcohol is the most effective cleaner for smudged fingerprints, dried-on toothpaste, and other stubborn stains.
If you apply some rubbing alcohol on a cotton pad and treat the smudges before washing off the whole mirror, you'll be left with a streak-free surface.

2. Spray A Vinegar & Water Chemical
You may use any glass cleaner you currently have on hand, but we suggest mixing equal parts white vinegar and purified water.
Not only is this concoction simple to whip up, but it also eliminates the streaking caused by the excessive soap in many commercially available sprays.
Just spray the mirror with a little coating of the solution and wipe it off. If you spray too heavily, the solution will run down your mirror.

3. Use Micro-fiber Cloth
While many go for paper towels, this is a bad idea since they may leave behind dust, residue, or lint while cleaning glass.
We discovered that a premium, flat-weave microfiber cloth is the most effective tool for thoroughly cleaning glass. It does a good job of cleaning without being too thick to leave behind a layer of lint or other debris.
To clean the mirror from top to bottom, begin at the top left corner and work your way diagonally across to the top right corner and back again.
4. Inspect For Streaks
Check the cleanliness of your mirror from all sides.
Spots and streaks may be removed by spraying a little quantity of vinegar and water solution over the affected area and wiping it clean. Be sure to keep your mirror clean.

Clean Office Mirrors in 5 Simple Steps
- Dust tends to collect in crevices and around edges, so that's where you should begin cleaning. Use an old toothbrush to gently remove the dust from the gap between the glass and the frame. Wipe the mirror down with a dry dust cloth to finish cleaning the surface. Even while a moist cloth is a great method to take up dust from a surface, you should never use it to clean a mirror. That'll only create a larger mess on the glass.
- Examine my face in the mirror for any signs of toothpaste, makeup, or dirty hands. Use rubbing alcohol and cotton to spot clean the affected areas. Cleaning the glass in fast, circular strokes is preferable than letting the cotton soak in the solution. Working rapidly is essential when using rubbing alcohol because of how quickly it evaporates.
- Next, fill a spray bottle with an equal amount of water and white vinegar and shake it up. To avoid getting the mirror so wet that the cleaning solution runs down it, spray it from a safe distance. When the glass is not wet, you may clean it in sections rather than having to wipe the whole surface as the cleaner runs to the base and dries.
- Mirror streaks may be avoided by cleaning the glass in circular or 'S' patterns. Since there are no long, straight lines involved in these short swiping motions, streaks are prevented. When you're done cleaning the top half of the mirror, you may clean the lower half by gently overlapping the two halves. To switch to a clean side, just flip your flat-weave microfibre cloth over or fold it in half.
- Using a lint-free cloth to polish the mirror right afterward isn't required, but it will leave you with a spotless and streak-free reflection that shines like new.