spa cleaning services

Chemical Guide: Deep Cleaning Your Hot Tub

When you maintain your spa, you take care to ensure that the water is clean, as well as the interior and bottom of the spa. The things you can't see in your hot tub are just as important.

In this post, we'll show you how to thoroughly clean your hot tub so you can see everything in there. This will assist keep your spa's water clean and fresh-smelling while also reducing odours and scum buildup.

Edomey | Spa Cleaning Services Vancouver

Why Deep Cleaning?

If your water is in excellent form, you may ask why a thorough cleaning is necessary. So it's a lot like your own place. Every now and again, you need to get down to business and give things a thorough cleaning.

Oils, lotions, cosmetics, hair products, and perspiration may all accumulate as filth in your hot tub. The majority of the accumulation takes place in areas that are imperceptible to the naked eye.

Your hot tub's water quality may suffer if this filth enters the water, preventing your filters from operating at their best.

At least once a year, you'll want to thoroughly clean your spa's inside and exterior to remove debris.

As a result, both what you can see and what you can't see are kept immaculate.

Contact Edomey | Vancouver Office Cleaning Services for professional cleaning services in Vancouver.

spa cleaning services

When?

Is there any way to find out? It's now or never.

At the very least, once a year, you should thoroughly clean your hot tub. In certain cases, though, your hot tub needs a little additional TLC and cleaning. Rather of battling dirt, germs, and chemical buildup, focus on removing it.

Cleaning your home may be necessary at any of the following points in time:

  • Your hot tub is smelling.
  • Bather loads have been substantial for you.
  • Water cannot be made clear.
  • If the tub has been sitting unused for a long time.

Contact Edomey - Spa Cleaning Services here.

How?

  • Remove leaves and other big debris from your filter to prevent it from becoming clogged.
  • Add the SpaGuard System Flush. Pick it up at one of our locations. In the night before your thorough cleaning, add this to your spa filter area.
  • For a period of 15 to 30 minutes, run your jets. In order to flush the system, turn the diverter levers through all of their positions. Close the cover on your spa and turn off the jets.
  • Overnight, run your spa's circulation system.
  • It's time to scrub your hot tub the following day. Drain your spa by removing the lid. Wear rubber gloves and use a sponge to clean the outside of your shell.
  • Filters should be cleaned or replaced, depending on their condition.
  • Refill your freshly cleaned hot tub with fresh water.
  • Cleanse and rebalance the water in your home or business. You are always welcome to bring a sample of your water to be tested for free.

What Chemicals Are Necessary For Your Hot Tub?

It's best to be safe than sorry when it comes to hot tub water problems. The hot tub chemicals may need you to postpone your bath for 20 minutes. However, it's better than missing it or making an unplanned hot tub chemical buying excursion.

  • spa cleaning services

1. PH Adjustment Products

A pH increase and a pH decrease are essential for regulating the pH of your hot tub. If your pH is low, you'll use a pH increaser, and if it's high, you'll use a pH decreaser.

But what exactly is pH, and why should you care? Your hot tub's water's acidity or basicity is indicated by this reading. Your water should be neutral so that it may be used for soaking. The skin might be irritated and the spa can be damaged if the pH level is too low. In addition to irritating the eyes and skin, sanitizers with a too high pH level are useless.

Non-Chlorine Shock

It's important to note that the oxygen produced by shocking agents serves the same purpose as the chlorine in disinfecting water. Chlorine levels might be elevated for a short period of time after shock treatment is applied. Chloramines and bacteria may be removed from the water using the sanitization procedure.

Sequestering Agent

To remove calcium and heavy metals from your water, use a sequestering agent It is possible for your hot tub water to develop an unappealing colour due to the presence of metals or minerals.

If the water in your hot tub is brown, red, orange, or green, it's time to apply a sequestering agent. When filling your tub with water, be sure to use a sequestering agent as well.

Sanitizer

When people use your hot tub, they bring germs and bacteria with them from the outside world. A sanitizer maintains the pH balance of the water, making it safe to drink. Chlorine and bromine are also acceptable options. sodium dichlor granules are recommended by Edomey Cleaning because they dissolve more fast and clean the water more quickly.

Defoamer

Foaming hot tub water may be alleviated with the use of this solution. What causes hot tub water to get foamy? Body oils, cosmetics, lotions, and other such items are often found to be the source of allergic reactions. Foamy water may be avoided by following a water care regimen and bathing before getting in the hot tub. However, if you're having a party, it's a good idea to have defoamer on hand.

Calcium

Calcium hardness is another parameter to consider while evaluating the water's chemical composition. Magnesium and calcium concentrations in water may be determined with this test. The water in your hot tub might get hazy or frothy if this isn't properly balanced. Scale buildup or metal component deterioration may also be seen. It is recommended that hot tub owners maintain calcium hardness increaser and calcium hardness decreaser on hand.

Hot tubs take chemicals and maintenance. However, with a quality filtration system, you can keep your water clean with fewer chemicals

Contact Edomey | Spa Cleaning Services for professional commercial cleaning services.